HOLLOW HMPE BRAID – halyard, sheet and splicing – Ø3 to 22 mm
HMPE hollow braid – an alternative to Dyneema for ropework, splices and load transfers
This HMPE hollow braid is an excellent alternative to Dyneema for sailors looking for a lightweight, very strong, flexible and easy-to-splice rope.
Thanks to its 12-strand single braid construction, it is an excellent base for many types of ropework: splices, soft eyes, loops, load transfers, spinnaker sheets and even lightweight halyards and sheets.
Highly appreciated for its excellent balance between weight, breaking strength and ease of handling, it is suitable both for sailors seeking performance and for users looking for a reliable rope for technical rigging setups.
Key advantages:
The HMPE hollow braid offers a very high breaking strength, with a performance level close to steel for the same weight, while remaining very flexible and pleasant to handle.
Its construction allows quick and clean splices, making it an excellent choice both for everyday ropework and for more demanding technical assemblies.
It also benefits from good fatigue resistance, bending resistance, abrasion resistance and a protective coating that contributes to durability in marine environments.
Applications:
This HMPE single braid is suitable for many on-board uses, especially when a lightweight, strong and easy-to-splice rope is required:
- load transfers,
- soft shackle or textile eye,
- spinnaker sheet,
- lightweight halyard,
- base for ropework and textile rigging setups.
Depending on the use, it may be advisable to locally add a protective cover made of polyester, HMPE or Technora where the rope runs through clutches, winches, sheaves or other friction points.
Construction:
single braid 12 strands.
Material: HMPE (High Modulus Polyethylene).
Finish: polyurethane coating to reduce abrasion.
Ø 3 to 22 mm.
Spool available in Ø 1.5 / 2 / 3 / 4 mm
Go further with ropework and materials
FAQ – HMPE hollow braid
What is HMPE hollow braid used for?
HMPE hollow braid is used for load transfers, textile eyes, spinnaker sheets, lightweight halyards and many textile rigging setups. It is particularly valuable when a lightweight, very strong and easy-to-splice rope is required.
Should you choose HMPE or Dyneema?
Ropes made from HMPE offer an excellent combination of strength, low stretch and light weight.
Fibres marketed under the Dyneema brand provide a well-identified material reference and are often used in the most demanding applications or in high-performance ropes.
For most marine applications – load transfers, ropework, textile eyes or technical rigging setups – HMPE braid already offers a very high level of performance.
Why choose a single braid HMPE rope?
A single braid HMPE rope allows quick splicing, offers very high breaking strength and provides an excellent performance-to-weight ratio. It is an excellent base for ropework and technical marine applications.
Can HMPE hollow braid run directly through clutches and winches?
It can be used directly in some configurations, but it is often recommended to protect it locally at friction or locking points, especially where it runs through clutches, winches or sheaves.
Can you splice this braid easily?
Yes. The hollow 12-strand construction makes splicing particularly accessible. This is one of the main advantages of this type of rope for users who want to make their own assemblies.
What is the difference between HMPE hollow braid and covered halyard rope?
HMPE hollow braid is lighter and easier to splice, but it does not offer the same protection as a covered rope at friction points. A covered halyard is often preferable when the rope works repeatedly in clutches, winches or locking systems.
Which diameter should you choose between 3 and 22 mm?
The right diameter depends on the loads involved, the type of assembly, the desired safety margin and the compatibility with your deck hardware. For an accurate choice, always consider the actual loads and the intended use on board.
📞 Need personal advice?
Need help choosing the right HMPE hollow braid, the right diameter or the best solution for your ropework and textile rigging setups?
Gorilla Ropes – High-Quality Marine Ropes – Made in France
gorillaropes.com